You are here:Home » Products » Sanitary Ball Valves » Details
Product

1/2'' Sanitary Full Port Ball Valves Manual Type AV-2MF AISI-304

1/2'' Sanitary Full Port Ball Valves Manual Type AV-2MF AISI-304

Application

AV-2MF series is extensively used in food & beverage processing, brewing, oil refinery, cosmetic, pharmaceutical, and chemical industries to control medium flow. The full port design with zero restriction makes it an optimum choice for viscous and particulate liquids.

Options

  • Two- way ball valve; Three-way ball valve;
  • T type, L type ball core.
  • With/without purge ports for SIP / CIP.

Materials

Materials: AISI-304
Size: 1/2''
FDA Seal
Valve seat: PTFE Gasket: EPDM, Silicone

Design Features

  • Maintenance free operation
  • Compact and portable
  • Small operating torque
  • Valve seals and gaskets comply with FDA 177.2600
  • Manual handle, pneumatic actuator, electric actuator are interchangeable.

Technical Specification

  • Sizes available from DN15-1/2" to DN100-4"
  • Max. working pressure (PTFE): 10bar (147psi)
  • Temperature range (PTFE): -20 ~ 350°F
  • End connections: sanitary clamp, butt-welded, threaded, flanged , I-line or others on request.
  • Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
  • Supply pressure for air actuator: 70 ~ 115psi

Technical Parameters

Steel material

Product wetted parts

AISI 316L / 304 (1.4404 / 1.4306)

Provided with material inspection report

Other steel parts

AISI 304

Seal material

Standard

PTFE

All seal materials comply with FDA 21CFR117.2600

Options

EPDM / VMQ(Silicone)

Pressure

Working pressure

0-1000psi

Supply pressure for air actuator

70 ~ 120psi

Temperature

Working temperature

PTFE: -20 ~ 350°F

Sterilization temperature

302°F (150°C, Max. 20 min)

Surface treatment

Inside surface treatment

Ra 16 ~ 32µin (0.4 ~ 0.8µm)

Outside surface treatment

Ra 32 ~ 64µin (0.8 ~ 1.6µm)

Connection

The diameter welding

Welding mouth:
DIN 11850-2 with 11850-1 / SMS / 3A / ISO Series, etc.

Connection ends: sanitary clamp, butt-welded, extended tube ends, or others upon request

Pneumatic control

Normally Closed (NC) - Air to open and spring to close;
Normally Open (NO) - Air to close and spring to open;
Air to Air (AA) - Air to open, air to close.